公卫人

 找回密码
 立即注册

QQ登录

只需一步,快速开始

查看: 8284|回复: 5

[外文投稿] 统计:如何解读结果

[复制链接]
ktorresjie 发表于 2014-5-20 20:39:22 | 显示全部楼层 |阅读模式

注册后推荐绑定QQ,之后方才可以使用下方的“用QQ帐号登录”。

您需要 登录 才可以下载或查看,没有账号?立即注册

x
如今已没有几个行业可以完全不涉及统计学思维的,绝大多数学科都多少需要使用统计学….. 统计学已经从我们日常思维的一个方面发展为无处不在的系统性研究工具….统计学思维承认: 我们对世界的观察总存在某些不确定性,永不可能完全准确。

Rowntree D (1981). Statistics without tears. A primer for non-mathematicians. Penguin Books Ltd., London, England.

统计是指收集、处理和解释数据的方法。由于统计方法是科学探索的固有内容,因此我们的博客已经在研究设计、方法、结果、图表等数处提及统计。但考虑到统计在多数科学研究中的重要性,有必要专门讲解其使用和表达。

在开始研究之前,在初步的研究设计中就应该考虑统计。首先,要考虑你需要收集哪些信息来检验你的假设或解答你的研究问题。研究有个正确的开始非常重要;虽然数据检验错误相对容易弥补,要用另外的样本组重新收集数据或者从同一样本中追加获取变量可就费时费力得多。如果你想检验某种疗法对普通人群的效果,你的样本要能够代表这个群体。如果比较的是分别有两种疾病或行为的两个群体,那这两个群体的其他变量如年龄、性别、种族需要尽可能一致。这些涉及的都是数据收集;如果在这一步就犯了错,你就有可能遇到严重的问题,甚至可能会在数个月后在同行审稿阶段遭到严重质疑而推翻重来。

其次,你要考虑要采用何种统计检验才能从数据中提炼出有意义的结论。这取决于数据类型。是用来表达某种标志物存在与否的分类数据吗?还是有具体数值的定量数据?如果是定量数据,是连续数据(测量所得)还是离散数据(计数所得)?例如,年龄、体重、时间和温度都是连续数据因为他们的值是在连续,无限可分的尺度上测量出来的;相反,人和细胞的数目都是离散数据,他们不是无限可分的,他们的值是通过计数得到的。你也需要知道你数据的分布:是正态(高斯)分布还是偏态分布?这也关系到你该采取何种检验。你一定要知道你收集的是何种类型的数据,这样才能用适宜的统计检验来分析和恰当的方式来表示。下面这个网址提供了选择适宜检验方法的指南,可能会有所帮助:http://www.graphpad.com/www/Book/Choose.htm

最后,需要知道如何解读统计检验的结果。P值(或 t、 χ2等)代表什么意思?这是统计检验的关键:确定结果到底意味着什么,你能下什么结论?统计能告诉我们某一数据集的集中趋势(如平均值和中位数)和离散趋势(标准差、标准误和百分位间距),从而明确该数据集的分布情况。统计学可以比较(如用t检验、方差分析和χ2检验)两个或多个样本组之间是否有非偶然的系统性差别。如果检验表明无效假设可能性很小,则差别具有显著性。一定要记住,用概率简化差别的“真实性”造成了两种风险,两种都取决于所选取显著性的阈值。第一个是第1类错误,是指本没有显著性差异之处检出了显著性差异。另一个是第2类错误,是指本有显著性差异但由于差别不够大而不能捡出。降低第1类错误的风险就会增加第2类错误的风险;不过这也比下不存在的结论要好。统计学也能给出关联的强度,从而允许从样本组中推断出适用于更广群体的结论。统计学赋予了本身价值有限的结果更多意义,并允许我们用概率下结论,虽然总是存在错误的可能。
实例


节选自《The Journal of Clinical Investigation》 (doi:10.1172/JCI38289; 经同意转载)。

清单
1.    在列举数据时,说明使用的是何种参数,如“均值±标准差”。
2.    说明数据分析所采用的统计检验方法。
3.    百分比给出分子分母,如“40% (100/250)”。
4.    正态分布数据用均值和标准差表示。
5.    非正态分布数据用中位数和 百分位数表示。
6.    给出具体的P 值, 如 写出 “P=0.0035”,而不要只写 “P<0.05”。
7.    “significant’ 这个词仅用于描述统计学上的显著差异。

英文原文

Statistics: what can we say about our findings?

Today,few professional activities are untouched by statistical thinking, andmost academic disciplines use it to a greater or lesser degree…Statistics has developed out of an aspect of our everyday thinking tobe a ubiquitous tool of systematic research… Statistical thinking is away of recognizing that our observations of the world can never betotally accurate; they are always somewhat uncertain.
Rowntree D (1981). Statistics without tears. A primer for non-mathematicians. Penguin Books Ltd., London, England.

Theterm ‘statistics’ refers to the methods used to collect, process andinterpret data. Because these methods are so inherent in the process ofscientific inquiry, there have been multiple references to statisticsthroughout our blog, namely, in the posts on study design, methods,results and display items. However, given the importance of statisticsin most scientific studies, it is worthwhile having a separate post onhow they should be used and presented.

Statistics should firstbe considered long before the commencement of any research, during theinitial study design. First, consider what information you need tocollect in order to test your hypothesis or address your researchquestion. It is important to get this right from the outset because,while data can be reanalyzed relatively easily if the wrong tests wereused, it is far more difficult and time-consuming to repeat datacollection with a different sample group or obtain additional variablesfrom the same sample. If you wish to test the efficacy of a treatmentfor use in the general population, then your sample needs to berepresentative of the general population. If you wish to test itsefficacy in a given ethnicity or age group, then your sample needs tobe representative of that group. If comparing two groups of subjectsseparated on the basis of a particular disease or behavior, then othervariables, such as age, sex and ethnicity, need to be matched asclosely as possible between the two groups. This aspect of statisticsrelates to the collection of data; get it wrong and you could facemajor problems, potentially the need to start the research all overagain, at the peer review stage many months later.

Second, youneed to consider what statistical tests should be applied so that youcan make meaningful statements about your data. This depends on thetype of data you have collected: do you have categorical data, perhapsdescribing the presence or absence of a particular marker, orquantitative data with numerical values? If your data is quantitative,is it continuous (that is, can it be measured) or discrete (counts)?For example, age, weight, time and temperature are all examples ofcontinuous data because they are measured on continuous scales withunits that are infinitely sub-divisible. By contrast, the number ofpeople in a given group and the number of cells with apoptotic featuresare examples of discrete data that need to be counted and are notsub-divisible. You also need to know how your data is distributed: isit normally distributed (Gaussian) or skewed? This also affects thetype of test that should be used. It is important that you know whattype of data you are collecting so that you apply the appropriatestatistical tests to analyze the data and so you present them in anappropriate manner. The following useful website provides a guide tochoosing the appropriate statistical test:http://www.graphpad.com/www/Book/Choose.htm

Finally, you need toknow how to interpret the results of the statistical tests you haveselected. What exactly does the p (or t or χ2 or other) value mean?That, after all is the point of statistical analysis: to determine whatyou can say about your findings; what they really mean. Statisticsenable us to determine the central tendency (for example, mean andmedian) and dispersion (for example, standard deviation, standarderror, and interpercentile range) of a dataset, giving us an idea ofits distribution.
Also using statistics, values from two or moredifferent sample groups can be compared (for example, by t-test,analysis of variance, or χ2 test) to determine if a difference betweenor among groups could have arisen by chance. If this hypothesis, knownas the null hypothesis, can be shown to be highly unlikely (usuallyless than 5% chance), then the difference is said to be significant. Itis important to keep in mind that there are two risks associated withreducing a decision about the ‘reality’ of a difference toprobabilities, and both depend on the threshold set to determinesignificance: the first, known as type I error, is the possibility thata difference is accepted as significant when it is not; the oppositerisk, known as type II error, refers to the possibility that asignificant difference is considered not to be significant because wedemand a larger difference between groups to be certain. Reducing therisk of type I errors increases the risk of type II errors, but this isinfinitely more preferable than reaching a conclusion that isn’tjustified. Statistics also provides a measure of the strengths ofcorrelations and enables inferences about a much larger population tobe drawn on the basis of findings in a sample group. In this way,statistics puts meaning into findings that would otherwise be oflimited value, and allows us to draw conclusions based onprobabilities, even when the possibility of error remains.

Example


Extracts from The Journal of Clinical Investigation (doi:10.1172/JCI38289; reproduced with permission).

Checklist
1.    Indicate what parameters are described when listing data; for example, “means±S.D.”
2.    Indicate the statistical tests used to analyze data
3.    Give the numerator and denominator with percentages; for example “40% (100/250)”
4.    Use means and standard deviations to report normally distributed data
5.    Use medians and interpercentile ranges to report data with a skewed distribution
6.    Report p values; for example, use “p=0.0035” rather than “p<0.05”
7.    Only use the word “significant’ when describing statistically significant differences.

Dr Daniel McGowan
分子神经学博士
理文编辑学术总监





本文引用地址:http://blog.sciencenet.cn/blog-288924-702946.html

评分

参与人数 1钢镚 +100 收起 理由
ywshui + 100 赞一个!

查看全部评分

本帖被以下淘专辑推荐:

jane11 发表于 2014-5-30 08:32:26 | 显示全部楼层
在统计分析的时候,有些必须罗列出来;还有其他的结果解读还需进一步详解哦!
回复

使用道具 举报

偏倚东南 发表于 2014-6-17 16:18:57 | 显示全部楼层
对这一点““significant’ 这个词仅用于描述统计学上的显著差异”深有体会,SCI写作中此词出现必须伴随给出具体的P值
回复

使用道具 举报

pandongxia 发表于 2014-6-17 22:48:56 | 显示全部楼层
都是牛人,需要好好向你们学习!
回复

使用道具 举报

小梦乐乐吟 发表于 2015-7-20 14:07:32 | 显示全部楼层
学习学习
回复

使用道具 举报

孙闻 发表于 2015-8-14 21:02:26 | 显示全部楼层
很有意义,帮我理清了思路
回复

使用道具 举报

您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

手机版|会员|至尊|接种|公卫人 ( 沪ICP备06060850号-3 )

GMT+8, 2024-3-29 15:24 , Processed in 0.061864 second(s), 7 queries , Gzip On, MemCached On.

Powered by Discuz! X3.4

© 2001-2023 Discuz! Team.

快速回复 返回顶部 返回列表